What's Holding Back The Double Glazed Window Repair Industry?
What's Holding Back The Double Glazed Window Repair Industry?
Blog Article
Double Glazed Window Repair
Double glazing is an excellent energy efficient investment that prevents loss of heat in winter and keeps your home cooler during the summer. Repairing your double-glazed windows when required is a great method to ensure they remain in good condition.
Over time condensation and misting could impact your double-glazed windows. This can cause your double glazed windows to be difficult to open and close.
Broken Panes
A stray ball or a stray pebble from your lawnmowers, or even a heavy storm can shatter the double panes of your windows and expose your home to the elements. Even though a glass window that has been damaged is difficult to repair but it doesn't have to be replaced. In fact the insulated glass between the two panes is still in good shape, and you can fix your double-pane window with some DIY effort.
You'll first need to remove any broken glass from the frame. You'll need to be careful to avoid any glass shards falling to the floor or falling from the frame. Make sure to wear a pair of gloves to protect your hands, and a cloth to protect the area surrounding the broken glass to avoid further damage or breaks. After removing the broken piece, carefully clean the entire frame of the window to eliminate any remaining sealant and debris. Sand rough areas of the window frame to create a smooth surface on which to put in your new glass.
After cleaning the frame and dried, you can apply a fresh layer of glass to the seam where the damaged pane was removed. This is the most effective way to ensure that your window is sealed and protected, and it will aid in reducing energy costs by keeping water and drafts from entering the house. Next, you will need to choose your glazing material. There are several options available, including clear tape which is more durable than regular tape and will help keep your window secure from further cracking, as well as glazing film that is similar to clear plastic wrap. The benefit of this type of material is that it can be painted to match the frame you have and will also keep snow and rain out as well.
Regardless of the material you select, it is important to press glazier's facets into the seam where the putty meets the frame. They will help hold the new glass in place and aid it to adhere to the frame. Glazier's points can be found in hardware stores, and they are available in pre-made ropes which you roll over the frame rabbets.
Condensation
If you have a problem with condensation, it's recommended to contact the window manufacturer. A lot of windows come with warranties and guarantees that cover the issues. Condensation and fogging in the panes of glass is a clear sign that the seals between your windows are damaged and can only be fixed by an expert who will replace both panes.
It is a tricky procedure that requires specialized tools to remove and replace the old window. A professional can handle this job and provide the tools. Making use of these tools can be dangerous, so it is always best to leave this kind of work to professionals.
Wear safety glasses and gloves if you opt to do it yourself. You could be exposed to flying glass fragments. It is also crucial to remove all putty and metal glazing points from the grooves in which the new window will be. It is also recommended to brush the frame with wire, and then vacuum or wipe it with a damp cloth. When the frame is dry and clean then you'll need get a replacement glass that is 1/8 inch smaller in each direction than your window, and then test it in the grooves.
You'll have to apply a layer of silicone caulk into the grooves of your frames to ensure that your new glass is secure in its installation. Once the silicone caulk has dried and cured, you can smooth it out and make any necessary adjustments. The wood molding will then be put back in place.
Double-glazed windows can become difficult to open or close in the event of extreme weather. Extreme temperatures may cause the frames of double-glazed windows to expand or contract, which causes them to slide and become stuck. You can try wiping down the frames with water and then lubricating them in the event that this happens, but it may be better to seek advice from the company that installed your windows.
Misted
If moisture is trapped between the glass panes, it can cause misted double glazing. Double glazing consists of two glass panes which are separated by an insulating area, typically filled with argon gas for better thermal efficiency. This results in an airtight seal that keeps warm indoor air inside, and cold outdoor air out.
The seal may fail over time, and moisture can build up between the glass panes which can cause them to turn to appear misty. This happens because the sun's heat causes the space between the window panes, which causes water to vapourize.
This is a normal occurrence however, if it occurs between the window panes, it could cause problems as it is no longer able to regulate the temperature of the room and allow the outside temperature to influence the indoor temperature. If you notice that your double glazed windows are becoming blurred, call the experts at Northfield Glass to investigate.
We can replace a single sealed unit without having to replace the entire window. This is less disruptive than a full replacement. Our misty glass repair involves removing and cleaning the glass and replacing it with a brand new one. This creates a seal that is watertight again.
There are companies within the field who claim to drill holes into your windows with mist and inject chemicals into them, which they claim will eliminate the condensation and fog but we don't recommend this method. This method is not just ugly, but it could also harm your toughened glass leaving you with a window that doesn't function properly.
If you don't take care to fix the issue quickly it could cause mold, which could not only damage the window, but also pose health risks to your loved ones. The condensation in the window could also lead to other problems within your home like damp or rot. In some instances, the window may need to be replaced entirely.
Failed or blown
Modern double-glazed windows come with two glass panes that have an inert gas or air between them. This improves their thermal efficiency, keeping heat in and cold out. As time passes, the gas may depressurize which can lead to a range of problems.
Condensation in between the panes is among the most common. It's not a sign of a window failure however it could be a sign you should replace them. Condensation is also a sign of a broken double glazing that will require a re-installation.
Double-glazed windows may also cause drafts. This could be due to an unsound seal, a broken handle, or a broken lock. A draught is noticeable and will lead to higher heating bills It is therefore essential that you get this fixed sooner rather than later. Test the seals on the window frame by feeling the cold air.
You will also notice water beads on the interior of windows if the window seals aren't performing as they should. This is a clear indication that you will need to seal your double-glazed windows.
Your window frames are designed to move slightly as they have to do in order to keep the glass sheets in the right place. However, over time, this special packaging material may get compacted, and this could break the all-important seal. This will allow air to move between the panes, which will reduce the efficiency of your window's energy consumption.
A blown seal is an obvious sign that your double glazing has failed and needs to be fixed immediately. A blown seal will stop your double glazing from fulfilling its primary purpose, which is window repairs to keep cold air out and warm air in. Additionally, a blown seal will let your home's moisture in, which could cause mold and other uncomfortable conditions. It is important to contact a double glazing repair specialist when you discover a blowing seal in your double glazed windows, since they could replace the entire unit.